
Waterjet cutting
Cold cutting with water and garnet. No heat-affected zone, no warping and no hardened edge, in steel, stainless, aluminum, brass, copper and most non-metals.
Waterjet cuttingFamily-owned metal shop · Bromley, Kentucky
One part or a hundred, from a CAD file or a sketch on a napkin. If it's metal, bring it to Pike Street in Bromley, a short drive across the river from downtown Cincinnati.
Mon to Fri, 7 AM to 3 PM Eastern
Family-owned since1955
Seven decades, one family.
Most jobs touch more than one machine. A bracket gets cut on the waterjet, welded to a frame and drilled to size before it leaves. Having all of it in one building means one quote, one schedule and one place to call.

Cold cutting with water and garnet. No heat-affected zone, no warping and no hardened edge, in steel, stainless, aluminum, brass, copper and most non-metals.
Waterjet cutting
Fabrication welding and repair. Frames, stands, brackets and assemblies built from parts we cut ourselves, so they fit before the first tack.
Welding
Machine shop work for the features that have to be right: bores, threads, faces and fits. One replacement part or a short run.
Machining
Cut, weld and machine in one shop. Tell us what it needs to do and what it bolts to, and we'll build it from raw stock to finished part.
Custom fabrication
Our own sign is plate steel, weathered to a brown patina. Yours can be a business logo, a farm entrance, a house number or a name for the garage wall, cut from a drawing, a logo file or a photo of a sketch.
Manufacturers, maintenance crews, contractors, farmers and homeowners all come through the same door. If your job isn't on this list, ask anyway.
A DXF or DWG, a dimensioned PDF, a sketch, or the broken part itself. Tell us the material, thickness and quantity if you know them.
We price the job and tell you when we can run it. If a different material or process would save you money, we'll say so.
The work happens here in Bromley. Call the shop and you're talking to the people making your part.
Come by Pike Street between 7 AM and 3 PM, Monday to Friday. We're a short drive off I-75 on KY-8.
Bromley sits on the Kentucky bank of the Ohio River, just west of Ludlow and Covington. You can drive here, hand us the part and explain it in person.
Bromley, Ludlow, Covington, Villa Hills, Crescent Springs, Park Hills, Fort Wright, Fort Mitchell, Erlanger, Elsmere, Florence, Hebron, Burlington, Union, Independence, Newport, Bellevue, Dayton, Fort Thomas, Highland Heights, Cold Spring and Alexandria.
Downtown, Queensgate, Lower Price Hill, Sedamsville, Riverside, Delhi, Price Hill, Western Hills, Camp Washington, Northside, Norwood and the rest of Greater Cincinnati.
113 Pike Street, Bromley, KY 41016. Pike Street is KY-8, the river road that runs west from Covington through Ludlow. From downtown Cincinnati, cross into Covington and follow KY-8 west.
Send it over. One part and short runs are normal work for a shop our size. If a job isn't a fit for us, we'll tell you and point you to someone who can do it.
A drawing or sketch with dimensions, the material and thickness, how many you need and when you need them. A DXF or DWG file is best for waterjet work. A photo of the old part next to a tape measure is a fine place to start.
It depends on the job and what's on the floor that week. Put your deadline in the quote request and we'll tell you whether we can hit it before you commit.
Yes. We're on the Kentucky side of the river, a short drive from the bridges into downtown, and plenty of our work goes back across them.
Usually, yes. Tell us what it is when you ask for a quote so we can confirm it will cut or weld the way you expect.
Monday to Friday, 7 AM to 3 PM. Call ahead at 859-581-0122 so someone is free to look at your job with you.
Send a drawing, a photo or a description. You'll hear back from the shop, not a call center.
Steidle Fabricating / Waterjet cutting
A waterjet cuts with a hair-thin stream of water and garnet abrasive at very high pressure. There is no flame and no heat, so the part comes off the table flat, with the same properties the material had going on.

Plasma and laser cut by melting. That leaves a heat-affected zone along the edge: a band of metal that has been hardened, discolored or warped. On thin sheet it can pull the part out of flat. On tool steel or hardened plate it can make the edge too hard to drill or tap.
A waterjet erodes the material instead of melting it. The edge is the same metal as the middle of the plate. You can tap it, machine it or weld it without fighting a hardened skin, and parts stay flat even when they are long and narrow.
The stream is narrow, so parts nest close together and inside corners come out tight. There is no tooling to make, which is why a single part is as reasonable to cut as fifty.
Nearly anything that can lie flat on the table. Most of our work is metal, but the same machine cuts materials a laser or plasma can't touch.
One exception worth knowing: tempered glass shatters under any waterjet. Ask us about anything unusual before you buy material.
Use a waterjet when heat is a problem, when the material is thick, reflective or non-metal, or when the edge will be machined or tapped afterward. Laser is faster on thin sheet in high volume. Plasma is quick on rough structural cuts. If you aren't sure, describe the part and we'll tell you honestly.
It depends on the material. Call 859-581-0122 with the material and thickness and we'll tell you whether it fits our table before you order anything.
Yes. Bring a dimensioned sketch, a paper template or the part you want copied, and we'll work out a cut file from it.
A waterjet edge is clean and slightly matte, like a fine sandblast. Many parts go straight into service. Tell us if an edge needs to be a sealing surface or a precise fit and we'll plan for machining.
Send the file or a sketch with the material and thickness. We'll quote it and tell you when it can run.
Steidle Fabricating / Welding
New fabrication and repair welding from a family shop that has been joining metal in Northern Kentucky since 1955. Bring it in, or send the drawing and we'll build it from raw stock.

A weldment is only as good as its fit-up. When parts are cut out of square, the welder spends the day filling gaps and pulling things straight, and the heat from all that extra weld is what warps a frame.
We cut our own parts on the waterjet, so tabs land in slots and holes line up before anyone strikes an arc. That means less weld, less heat and less grinding, and a frame that sits flat on the floor when it's done.
Things crack, wear through and get backed into. A lot of what comes through the door is a broken part and a deadline. We'll look at how it failed before welding it back together, because a bracket that cracked once in the same spot usually needs a gusset, not just a bead.
If the part is past saving, we can cut and machine a new one from the old one as a pattern.
Yes. Call ahead at 859-581-0122, then bring it by between 7 AM and 3 PM on a weekday so we can look at it with you.
Steel, stainless and aluminum cover most of what we see. If you have something else, tell us the alloy and we'll tell you whether we're the right shop for it.
Yes. Send the drawing with material callouts and quantities. If something on it will be hard to build or could be made cheaper another way, we'll raise it before we quote.
Of course. Bring your parts or your half-finished project and we'll pick it up from there.
Send photos or a drawing. For repairs, a quick call is often the fastest way to an answer.
Steidle Fabricating / Machining
Machining for the features that have to be right: bores, threads, faces and fits. One replacement part for a machine that is down, or a short run of the same piece.

The waterjet gets a part to shape. Machining gets it to size. A cut hole is fine for a clearance bolt, but a bearing bore, a threaded hole or a face that has to seal needs to be machined.
Because both happen here, the blank moves from the waterjet table to the machine without leaving the building. You get one part number, one quote and one shop responsible for whether it fits.
Older equipment runs on parts nobody stocks anymore. If you have the worn or broken piece, bring it in. We can measure it, work out what it was supposed to be before it wore, and make a new one.
This is often quicker and cheaper than hunting a discontinued part number, and it gets a machine back to work.
Usually. Bring every piece you have, plus the part it mates with if you can. The mating part tells us what the worn dimensions used to be.
Yes. A single part to get a machine running is exactly the kind of work a small shop is for.
Short runs, yes. Send the quantity and the drawing. If the volume calls for a production house, we'll tell you.
Put the tolerances you need on the drawing or tell us which features matter. We'll confirm what we can hold before we quote, and we won't take a job we can't measure.
Bring the old part or send a drawing. We'll tell you what it takes to make a new one.
Steidle Fabricating / Custom fabrication
Cutting, welding and machining in one shop, so your job doesn't ride around town between three of them. Tell us what it has to do. We'll work out how to build it.

Most fabricated parts need more than one process. Split that across three vendors and you manage three quotes, three lead times and three opinions about whose fault it is when the holes don't line up.
Here the same people cut it, weld it and machine it. If a hole pattern needs to move a sixteenth to clear a weld, that gets fixed at the bench in a few minutes.
Not sure whether your idea is buildable? That conversation is free. Call or stop by with what you have.
It's enough to start. Bring a sketch, photos of where it goes and the measurements you have. We'll ask the questions that turn it into something we can build.
Yes. With a waterjet there's no tooling to pay for, so changing the design between version one and version two costs you a new cut file, not a new die.
Yes. Bring the part. We can copy it, strengthen it, or change it to fit something it wasn't made for.
Both. The quote process is the same whether you're a plant engineer or a neighbor with a trailer.
Describe it in a few sentences and attach whatever you have. We'll come back with questions or a price.
Steidle Fabricating / Custom metal signs
Signs, letters and logos cut from plate on our waterjet. One sign for the end of the driveway or a set for every door in the building, made a few miles from where it will hang.

The sign in front of our shop is cut steel plate. Left raw, steel weathers to the deep brown you see here and holds that look for decades. It is the same material and the same cutting we'd put into yours.
A waterjet follows any line you can draw, so script lettering, fine logos and inside corners all come out crisp. Because it cuts cold, thin letters don't warp or discolor on the way off the table.
Steel is the classic. Leave it raw to rust to a patina, or have it painted or coated for color. Stainless stays bright and suits kitchens, breweries and modern storefronts. Aluminum is light, won't rust and is easy to hang on a wall.
Tell us where the sign will live, indoors or out, and how you plan to mount it. We can cut mounting holes, tabs for stakes or slots for standoffs into the sign itself so it goes up clean.
A vector file (AI, EPS, SVG, DXF or a vector PDF) is ideal. A clean black and white image or a photo of a sketch works too. We'll let you know if anything in the design is too fine to cut at the size you want.
Tell us the size you're picturing. Very thin strokes and tiny inside details have limits that depend on material thickness, and we'll flag those before cutting.
Yes. A waterjet follows the outline of your artwork, so the proportions stay true. Letters with enclosed centers, like O and A, need small bridges or a backing plate, and we'll show you the options.
One is fine. So is a set of matching signs for a whole property.
Send your artwork or wording with a rough size. We'll reply with a price and any questions about the design.
Steidle Fabricating / About the shop
More than seventy years of cutting, welding and machining metal in Northern Kentucky, with the family name still on the sign out front.
What you can expect
If we can do it, we'll say what it costs. If someone else would do it better, we'll tell you.
Cut, welded and machined at 113 Pike Street by the people you spoke to.
859-581-0122 rings in the shop, Monday to Friday, 7 AM to 3 PM.
Seven decades in Northern Kentucky. Our customers are our neighbors.

Bromley is a small river town between Ludlow and Villa Hills, a few miles west of Covington. A business lasts here by doing right by the people around it, and Steidle Fabricating has been at it since 1955.
When you call, you talk to someone who works on the floor. When you stop by, you can show us the part and point at the problem. The equipment has changed since 1955, and a waterjet now does in minutes what once took a torch and an afternoon. The way we deal with people hasn't.
Call ahead and stop by with your part or your drawing. Ask for Ken.
Steidle Fabricating / Request a quote
Tell us about the job. The more you can share on material, size and quantity, the faster we can give you a real number.
Last step: send it to sales@steidlefab.com and attach any drawings, DXF files or photos.